Description
Wake-up Dongle for KTM/HQV/Gas Gas
The TwoRide Wake-up Dongle for KTM /HQV/Gas Gas fuel injected models allows you to prime the oil pump in order to push air bubbles out of the oil line (2 strokes only) and turn on the ignition on 4 strokes to install and tune your GET ECU. This could be at your garage, after replacing the oil pump (2 strokes), as a preventive measure when you want to see if the oil pump function properly or even when the bike runs for a while on it’s side while the oil tank is semi empty. When that happens, simple actions such as priming the oil pump can be extremely frustrating if you don’t find the priming plug!
The Priming Adapter can also be used as a “wake up” dongle. This will allow you to transfer about 5 seconds of fuel without draining your battery. Pair with the Slavens Mule Fuel Transfer Hose to make transferring fuel a breeze. The Priming Adapter attaches permanently inside the bike airbox.
To prime the oil pump:
- Remove airbox cover
- Hold throttle wide open
- Push the button on the plug
- After 5 seconds leave the throttle and the priming process will start
- Priming process will finish after about 25 second, or few seconds after leaving the button
Fits:
`18-25 KTM 125/150/250/300 SX/XC/XC-W/EXC (Does NOT fit `23 TBI models)
`17-25 KTM 250/350/450/500 EXC-F/XW-FXCF-W/6D
`17-25 KTM 250/350/450 SX-F/XC-F
`18-25 HQV 125/150/250/300 TC/TE/TX (Does NOT fit `23 TBI models)
`17-25 HQV FE 250/350/450/501
`17-25 HQV FC/FX 250/350/450
`21-25 Gas Gas MC/EC/EX 125/250/300 TPI & TBI models
`21-25 Gas Gas MC/EC/EX 250F-500F
Availability: In stock
Ships: Worldwide
