38mm HV Lectron Power-Jet Carburetor for GasGas
Slavens Racing has teamed up with Lectron Fuel Systems to produce the ultimate carburetor for the GasGas 2 stroke models. Jeff is always looking for ways to improve performance, power delivery and fuel economy on dirt bikes so he asked for help from Kevin at Lectron. The combined team work has evolved into the Lectron HV carburetor. The 38mm HV Lectron Power-Jet carburetor delivers the low-end and mid-range torque/grunt of a 36mm carburetor and the horsepower and top-end over-rev of a 38mm carburetor. The increased performance and smooth power delivery combined with a big increase in fuel mileage and automatic elevation/temperature compensation make it a no brainer. Once correctly set-up, the Lectron is on auto-pilot.
Used and endorsed by the Slavens Racing team.
The Slavens Mule 38mm HV (High Velocity) Lectron Power-Jet Carburetor is your best performance option for GasGas 2 stroke models.
- Only available at Slavens Racing
- Proprietary HV venturi design
- Jet-less (no jets)
- Automatically compensates for elevation & temperature changes
- Dramatic increase to fuel economy
- Smoother power delivery than stock Keihin
- Increased performance
- Machined for perfect fit
- Pre-tuned for each specific model & application (note: some minor tuning may be required)
- Made in the U.S.A.
- Available in 38mm HV only
* 38mm HV Lectron Power-Jet Carburetor
* Lectron specific throttle cable
’00-18 GasGas 125-300
Return policy: 30 days – If you put fuel in the carburetor it is considered a used product and there will be a significant restocking fee.
Availability: In stock
Message: Mr Slavens, I have just purchased one of these items and thought I needed to share my experience. You’ll be pleased to know, despite being a Kiwi (New Zealander) and tinkering is a natural habit, I resisted the urge after hilariously reading your instructions and gathering there was nothing to tinker with that could cause good things to happen. For those that are slow readers I’ll cut to the chase, the bloody thing is brilliant, does what it says on the box (even without tinkering?) and I’d highly recommend. But then I knew that because you have recommended it and so far….. Ring ominous bell….. you’ve not been wrong!! It took a mere 20mins to install and most of that was the new throttle cable. I adjusted, touched or fiddled with nothing, absolutely nothing not even idle and the bike started second kick (it is due for a new top end ) and idled perfectly. Today I gave the damn thing a good test ride with 4-5 hours of mostly tight and very technical stuff, but also including WOT sections and “Oh my god I am gonna die” rhythm sections at speed. I believe you promised me the same if not better low end and significantly more top end with this carb (being a 38 over a 36 standard, you’d sort of hope so). I might be over stating your warranty ), but no less it delivered, in my opinion, more bottom end and the top…. should come with a warning on the box, my right arm is held on with bolts and sticky tape (I’m sure that is what the surgeon called it) and it certainly felt like I needed to get some enforcement work done on that after today’s fast sections. Thank you, sir, for yet another great product, great fast (to the other side of the world) service and as always great grin factor. Although you have left me with a twitch as I resist the urge to fiddle), there is no way I will be wanting to mess up that sweet fueling. P.S. more than happy for you to use this anyway you feel fit. You and your team have earned it.
Just wanted to pass along how delighted I am with the Lectron carb you provided me. It’s a 100% great item. Fits my 2017 KTM 300.
Can’t say enough about how large a change its made in the bike. Way more power at all points.