Description
Throttle Cam System for KTM, Husaberg, Husqvarna, Beta, Gas Gas by G2 Ergo
The Throttle Cam System incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening. The cam pulls the throttle cable as the rider rotates the grip tube. By altering the conventional, circular shaped cam, a vast improvement in control is achieved.
The Throttle Cam System has cam options with reduced radius for the first ½ of throttle rotation, which requires a slightly farther turn to achieve the same carburetor or throttle body opening position as a stock throttle. This slightly longer pull makes a huge difference in rider control as the power is rolled on. The system comes with a “100CAM” – same as stock, “200CAM” – starts out 10% smaller than stock and “400CAM” – starts out 20% smaller than stock. The radius of the 200CAM and 400CAM increases or “ramps up” to stock size at ½ throttle to keep overall rotation required to reach full throttle at or near stock rotation.
- Machined from 6061 aluminum
- Self-lubricating Delrin bushings at each end of tube provide an ultra-smooth feel
- Alternate cams included to fine tune control
- Fits inside the stock throttle housing to stock cables
- Removable end cap for simple handguard installation
- Installs in minutes
- Made in the U.S.A.
Fits: See fitment tab above
Availability: In stock
Ships: Worldwide
