RIGID Adapt XE Extreme Enduro LED Headlight Kit
The RIGID Adapt XE Extreme Enduro LED Headlight Kit has a signature look that is unlike any other off-road motorcycle LED light on the market. Feature packed with the most advanced patented technology, this dirt bike light features a high-strength aluminum heat sink and an impact resistant polycarbonate lens. Whether running a factory stator with voltage regulator or have additional power available, the Adapt XE will give you the light you need, when you need it, where you need it. Own The Night with RIGID’s Adapt XE motorcycle light.
On the inside the Adapt XE contains cutting-edge technology. It takes off-road lighting performance to a whole new level with two layers of adaptive response to your bike and driving conditions.
The first layer of adaptive response is RIGIDs Active Power Management (APM) system which continuously monitors input voltage to determine the status of the vehicles electrical system. If the voltage is stable, then the Adapt XE will continue to utilize all available power to give you the most output possible. If the available voltage to the light begins to drop due to insufficient power, RIGID’s APM system will gradually reduce the lights power consumption until the bikes voltage stabilizes.
The second layer of adaptive response featured in the Adapt XE is RIGID’s proven Active View Technology. This technology uses an internal GPS module to determine the bikes speed, allowing the Adapt to properly distribute all available power among three unique optic zones. Utilizing the three optic zones then allows the Active View Technology to create the ideal beam pattern to suit the rider’s needs. As the vehicles speed changes, power is dynamically routed through various optic zones. Scene optics utilized for low speed, driving optics for moderate speed and spot optics for high-speed driving. Power is then transferred gradually between optic zones allowing for a seamless transition between beam patterns. This provides much brighter and more natural looking light wile reducing eye fatigue.
As an extra feature, the Adapt XE features a Magnetic Reed power clip for additional customization. When the switch is in place it limits the light to consuming a maximum of 2.7 amps. With the switch removed the light consumes up to 5.6 amps when all zones are activated.
- 3 Optic Zones – Scene, Driving, Spot
- Slow, Moderate & High-Speed beam patterns
- Seamless beam transition
- Active Power Management™ System – power capacity sensing
- Active View Technology™ – internal GPS module
- Use in Adapt Mode or All On
- Works with factory stator or battery
- Impact resistant polycarbonate lens
- Durable UV polyester powder coat
- Pressure equalizing vent
- Operating temperature -22F to +158F/-30C to +70C
- 8786 Lumens at 79W
- 9-32V DC
- Alloy housing and heatsink
- Limited lifetime warranty
- Off road use only
Full kit includes: Adapt XE LED Headlight, number plate (black or white), mounting bracket, wire harness, 3-position handlebar switch, amber light cover and Magnetic Reed power clip
Fits: Most off road motorcycles
Models listed below have known fitment issues and may require additional modifications. Full instructions for modification can be found here.
`21 Honda CRF450L – DOES NOT FIT
`21-22 Husqvarna FE 501 – Must remove plastic connector support and either relocate voltage regulator or modify the kit’s fork tube clamp.
`19-22 KTM 300 XC-W TPI – Must remove plastic connector support and either relocate voltage regulator or modify the kit’s fork tube clamp.
`21-22 Kawasaki KX450 – Must zip tie wiring out of the way of the kit’s fork tube clamp
Availability: In stock